Path Ping windows Basic Networking Commands Tutorial Part-7 {2021}

Опубликовано: 20 Июнь 2021
на канале: R.R technologies

437

Path ping windows Basic Networking Commands Tutorial Part-7 {2021}
#windows #networking #path_ping #pathping #windows_networking
#windows_network_troubleshooting

Please subscribe our channel

Also like, share, comment

Stay tuned for new updates

✔ SYSTEMINFO AND HOSTNAME part -1 :    • SYSTEMINFO AND HOSTNAME windows Basic...
✔ ipconfig part - 2 :    • ipconfig windows Basic  Networking Co...
✔ dns flush part - 3 :    • dns flush windows Basic  Networking C...
✔ Ping (part-1) part - 4 :    • Ping (part-1) windows Basic  Networki...
✔ Ping (part-2) part - 5 :    • Ping (part-2) windows Basic  Networki...
✔ Tracert (Traceroute) part - 6 :    • Tracert (Traceroute) windows Basic  N...

This is a basic tutorial to Displays path ping. path ping Provides information about network latency and network loss at intermediate hops between a source and destination. This command sends multiple echo Request messages to each router between a source and destination, over a period of time, and then computes results based on the packets returned from each router. Because this command displays the degree of packet loss at any given router or link, you can determine which routers or subnets might be having network problem.

pathping /n :- Prevents pathping from attempting to resolve the IP addresses of intermediate routers to their names. This might expedite the display of pathping results.

pathping /h:- Specifies the maximum number of hops in the path to search for the target (destination). The default is 30 hops.

pathping /q:- Specifies the number of echo Request messages sent to each router in the path. The default is 100 queries.

Thanks for watching

Please subscribe our channel