DIY EL84 SE Tube Amp // Building a stereo vacuum tube amp from scratch
This is my version of a EL84 (6BQ5) Single Ended Stereo Tube Amp.
This amp produces around ~3 watts. This is not an unique circuit design by any means. Inspiration of this circuit is from the Decware, Budgie and RH84 amps with a touch of my own thoughts and perceived enhancements.
Specs:
One: 12AT7
Two: EL84 vacuum tubes (1 per channel)
Two: 5k Primary - 8 ohm output transformers (Edcore)
One: 260-0-260 ~100ma power transformer (Hammond 270DAZ)
If you enjoyed this video please consider buying me a coffee. I would appreciate your support:
https://www.buymeacoffee.com/MikeFreda
The circuit shown is a mixture of topologies that I have built over the years. It is not unique and few will notice similarities between various circuits posted in tube literature and various DIY Forum/Communities. I do not assume any ownership of this design. This is posted for hobby use only. Feel free to copy, adjust and modify.
Full Build Document (Parts list, Schematic, Grounding Layout, B+/Signal Layout and Pictures)
https://drive.google.com/file/d/1Atkk...
Schematic: https://drive.google.com/file/d/1fU8V...
Parts list: https://drive.google.com/file/d/1WogY...
Hakko Solder Station: https://amzn.to/3PvQaD7
Kester Solder: https://amzn.to/3aJKNBI
Digital AC Voltmeter: https://amzn.to/3UewrgY
Valve Amplifiers - Morgan Jones - https://amzn.to/43wQjNc
WARNING: Tube amplifiers contain very high and potentially lethal voltages! Drain all filter caps and check voltages before commencing work.
Discharge tool: • Making a Capacitor Discharge Tool // Disch...
0:00 Intro
1:55 Chassis
8:40 Wiring
13:04 Testing
15:44 Circuit
Disclaimer: Some of these links are affiliated where I’ll earn a small commission if you make a purchase at no additional cost to you.
Camera:
Canon M50 (Sigma 16mm 1.4f lens)
iPhone 11
Rode Wireless Go II
Amp mic'd: Rode VideoMicro
Lighting:
Aputure Amaran AL-M9
Neewer CB100 Video Light
Neewer 26" Soft Box
About This Channel:
This channel has a wide variety of content. I’m interested in many things and topics. I create videos on things I like and what I feel my subscribers would like as well.
This channel is basically about two things:
1.) Show you how to MAKE things, FIX things, TIPS on how to do things and to give you IDEAS on how to make your life a bit easier! I encourage you to use your hands the to learn something new!
2.) People say I do fun and interesting things and have interesting hobbies. I like to share that with you and I hope this inspires you to do things and to get out there as well!
