Raspberry Pi 5: The Ultimate Ultrasonic Sensor Guide
🚀 Ready to unlock the full potential of your Raspberry Pi 5?
Join the Pi Spark newsletter & grab your free “10-Command Jumpstart” PDF:
👉 https://tally.so/r/w5EeNv
🧪 In this project:
Learn how to connect an HC-SR04 ultrasonic sensor to your Raspberry Pi 5 and measure distance using Python. I’ll guide you through the full setup—from wiring the breadboard to writing the script.
🛠 Parts you'll need:
Raspberry Pi 5 — https://amzn.to/3Hd3wFm
Breadboard — https://amzn.to/43eqiEk
HC-SR04 ultrasonic sensor — https://amzn.to/3SBj8oK
SD Card — https://amzn.to/3ZfS9Tq
1 kΩ resistor — https://amzn.to/45b2cwK
2 kΩ resistor — https://amzn.to/45b2cwK
8× female-to-male jumper wires — https://amzn.to/43eqiEk
🧠 What you'll learn:
Wiring the sensor to your Pi
How the Trig & Echo pins work
Running the Python script to get accurate distance readings
🧾 Full code + more:
Get the complete script here → https://bit.ly/41vdJ8v
Subscribe for more free tutorials → https://tally.so/r/w5EeNv
Some of these are affiliate links—using them helps support the channel at no extra cost to you.
