How to flash openwrt firmware to Tp-link AC1200 c50
Support channel: https://www.youtube.com/c/HeikkiKoivi...
Step:
Set up tftp server providing the file.
Set the IP address on the network server to 192.168.0.66
Turn off the router.
Connect the computer / server to the LAN port on the router.
Press and hold the reset button / wps.
Turn on the router and wait until WPS LED will light - about 8 seconds.
Began recovery procedure.
Release the reset / wps.
Wait about 60 seconds.
Links:
Firmware:
https://openwrt.org/toh/hwdata/tp-lin...
tftp server opensource:
http://tftpd32.jounin.net/tftpd32_dow...
TP-link AC1200 on Amazon:
US:
https://amzn.to/3ES8sbT
DE:
https://amzn.to/32MHa9U
ES:
https://amzn.to/3EUb1dS
Music:
High wire - the 126ers
---------------------------------------------
DISCLAIMER: The information presented in my videos is intended for guidance purposes only. I make NO WARRANTIES that this information is complete, reliable, accurate, and up-to-date. You are solely responsible for any actions you take from this information, and I am not liable for any losses and damages in connection with the use of this information.
