[How To] Cisco SD-WAN - Onboarding a Catalyst 8000v (or CSR 1000v)

Опубликовано: 20 Май 2021
на канале: 0x2142 - Networking Nonsense

12,781

139

In this video, we'll walk through how to setup & onboard a Catalyst 8000v virtual router to a Cisco SD-WAN network. These steps also apply to a CSR 1000v router. Note that the configuration in this video is 100% manual, and does not use any day 0 auto-provisioning capabilities.

Additional details in the blog: https://0x2142.com/how-to-cisco-sd-wa...

Links / Follow me elsewhere:
Blog: https://0x2142.com
Twitter: / 0x2142
Mastodon/Fediverse: @[email protected]
GitHub: https://github.com/0x2142

If this video was helpful to you, please consider subscribing & sharing! Thank you!

Want to support this channel? Buy me a coffee: https://www.buymeacoffee.com/0x2142

Thanks for watching!
Matt

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Chapters:
0:00 - Intro
0:55 - Lab Overview
1:46 - Switching from Autonomous Mode to Controller-managed
4:15 - SD-WAN System Config Settings
5:35 - Interface & Tunnel Config
6:45 - Loading a Self-Signed Enterprise CA Certificate
8:53 - Generate OTP Token in vManage
9:37 - Activating the Catalyst 8000v (& Validation)
12:09 - Extra: Command Differences - 'show ip route' vs 'show sdwan ip route'

Standard Disclaimer: Any comments / opinions here are my own, and do not represent my current or former employers.