Tesla Open Inverter board ESP32 programming tutorial

Опубликовано: 24 Сентябрь 2024
на канале: Latuta EV

1,694

I’ve successfully made a Tesla motor spin using an Open Inverter board. Now, I’m working on my own variant with some improvements.
One of the key changes is the introduction of a new ESP 32 WiFi module.
I faced some challenges getting it to work, so I decided to create this tutorial to help others who might encounter similar issues.
In my current design, I’m using an ESP32 Wroom module and integrating it directly into the PCB design. But don’t worry the programming method covered in this tutorial applies to any USB-based ESP32 board.

☕☕☕ If you would like to support me please send a donation via the link below. You help will be greatly appreciated. ☕☕☕

https://www.buymeacoffee.com/LatutaEV