My Process For Printing on the Moai - Hollow, Automatic Supports and Raft

Опубликовано: 28 Июнь 2018
на канале: Chaos Core Tech

5,487

144

This video shows how I prep my models to be printed on the Peopoly Moai. I'm not an expert on this subject, but I figured I could help a few people out by giving them a starting point. :)

I use Meshmixer to hollow my models out:
http://www.meshmixer.com/download.html

I use XYZware_Nobel to add automatic supports (make sure you pick the "Nobel" one):
https://www.xyzprinting.com/en-US/sof...

I use B9Creator to add a raft:
https://www.b9c.com/support/documenta...

This video from Evan at Model3D does a very good job of showing how to add supports manually using b9Creator:
   • How To Resin Print: Adding Supports T...

==============================================

Get your very own CCT shirt and help support the channel!
https://teespring.com/stores/chaoscor...

Help support this channel on Patreon:
  / chaoscoretech

Equipment We Recommend and Use! (Amazon)
https://www.amazon.com/shop/influence...

Thanks for Watching!
Don't forget to like and subscribe!
Twitter:   / chaoscoretech   a
Chelsey on Twitter:   / chelsc423
Instagram:   / chaoscoretech