How to configure Default Route in Cisco Router - CCNA, CCNP
Today we will learn that how to configure default route on cisco router.
Support us on Patreon - / onlinenetworkssolution
Default route is a setting on a computer that defines the packet forwarding rule to use when no specific route can be determined for a given Internet Protocol (IP) destination address.
All the IP datagrams with unknown destination address are sent to the default route.
Router1#config t
Router1(config)#int fa 0/0
Router1(config-if)#ip add 10.0.0.1 255.0.0.0
Router1(config-if)#no sh
Router1(config-if)#int fa 0/1
Router1(config-if)#ip add 1.0.0.1 255.0.0.0
Router1(config-if)#no sh
Router1(config-if)#exit
Router1(config)#ip route 0.0.0.0 0.0.0.0 10.0.0.2
Router1(config)#do wr
Router2#config t
Router2(config)#int fa 0/0
Router2(config-if)#ip add 10.0.0.2 255.0.0.0
Router2(config-if)#no sh
Router2(config-if)#int fa 0/1
Router2(config-if)#ip add 2.0.0.1 255.0.0.0
Router2(config-if)#no sh
Router2(config-if)#exit
Router2(config)#ip route 0.0.0.0 0.0.0.0 10.0.0.1
Router2(config)#do wr
Please Subscribe.
You may follow us:
Websit: https://onlinenetworkssolution.blogsp...
Facebook: / onlinenetworkssolution
Google Plus: https://plus.google.com/u/0/110870009...
