DIY Audio Amplifier Board | 300Watts R.M.S |
Components Description
------------------------------
Semiconductors
-------------------------------
TIP142 X 2 - NPN (Negative Positive Negative) Darlington Pair
TIP147 X 2 - PNP (Positive Negative Positive) Darlington Pair
TIP 41 X 2 - NPN (Negative Positive Negative)
BC558 X 4 - PNP (Positive Negative Positive)
------------------------------
Diodes
------------------------------
1N4007 X 4
GBJ1506 -DB (Diode Bridge)
-----------------------------
Resistors
-----------------------------
0.47R 5W X 4
3.3K 1W X 4
33R X 2
22K X 4
10K X 1
27K X 2
220 X 2
1.5K X 2
------------------------------
Capacitors (Polar)
------------------------------
100UF / 50V X 2
10UF / 50V X 4
4700UF / 50V X 2
----------------------------
Capacitors (Non Polar)
----------------------------
104 or 100NF (Polyester or Ceramic) X 2
----------------------------
LED
----------------------------
3 Pin Block Connector X 2
2 Pin Block Connector X 2
----------------------------
This is a 300Watts R.M.S Amplifier circuit that produces 150 Practical Watts per channel
This is one of the very cheap high power and good quality output amplifier.
If you want to order DIY or Fully Assembled kits of this project, please whatsapp on this number
0324-4407943
