How to cleave the fiber properly?
The preparation of the instruments：
16S fiber fusing machine, fiber line, scissors, fiber cleaver, stripping pliers, fiber box, alcohol, cotton paper
Three steps to prepare optical fiber before fiber fusion:
1. Reroming the coating
Peel off the sheath at least to leave a 50mm coating (loose and tight). Remove the coating layer with stripping pliers, the length is 30~40mm.
2. Clean the fiber with an alcohol-dipped cotton paper.
3. Fiber cleaver
cutting fiber with high precision fiber cleaver and strictly control the length of cutting fiber
Note：
Ensure that bare optical fibers and their sections are not stained.
avoid placing optical fibers on dirty surfaces
check whether the v-shaped groove and pressure hammer are clean. If not, it must be cleaned with cotton swabs dipped in alcohol
#Giuntatrice #Palmare #Portatile Fttx #Mannaia #soudeuse #CliveuseFibreOptique #alignementdurevêtement
For European market: please contact # [email protected] # or wechat 008615800289791
