Crown Vic Suspension? Pro Touring V8 Triumph Build – Project GT6R – Ep16
Today we're fabricating a cradle (crossmember... subframe) to get our Crown Victoria front suspension mounted up! There's a lot of geometry that goes into suspension design, including: Camber, Caster, Toe, King-Pin-Inclination, Scrub Radius, Ackerman, Anti-Dive, Roll-Center and Instant Center. Not to mention it all needs to fit in our tiny car...
That's a lot of stuff to keep in mind, but it's all important, so you gotta do what you gotta do!
Our 1971 Triumph GT6 is receiving a transplanted 5.3l LS4 V8 and Mustang T5 gearbox... among others things... like a Corvette Dana 36 differential... and a bellhousing from a Jeep.
So. Not exactly your typical Triumph.
Next time we'll finish up the rest of the suspension mounts and press on with getting that V8 nailed down - so SUBSCRIBE so you don't miss anything!
Please SHARE this video with your friends, it's a small step that will really help us!
$1 Patreons get videos a day early:
/ fanatikbuilds
FaceBook @fanatikbuilds:
/ fanatikbuilds
Instagram @fanatikbuilds:
/ fanatikbuilds
Donate with PayPal:
https://www.paypal.com/cgi-bin/webscr...
Music by:
https://audionautix.com/
#ProjectGT6 #LSswapped #GT6R #Restomod #FanatikBuilds #CorvetteParts #homebuilt #engineswap #hotrodding #lsx
#lsswaptheworld #customchassis #fabrication
We’re just a couple of guys (not trained mechanics) who enjoy problem solving, creating new things, and showing you how we did it. We can’t promise that anything we do will work for your project, or that you, someone else, or your warranty will not be harmed or affected by doing it too. Please work responsibly and do not mess around with machinery that you are not comfortable with, even if we made it look easy!
