Making Guitars With Blacktail Studio's Scraps - Custom Guitar Build
Thanks to Cam @BlacktailStudio for being a part of these crazy guitar builds! What do you think of them?? More beauty shots and videos showing the final result on my other socials. Check them out!
Become a member of the channel to future guitars, amps, templates and more!
/ @thewoodenhobbyist
➡️ENTER THE GIVEAWAY HERE: https://www.thewoodenhobbyist.com/giv...
➡️Check out this live edge slab guitar build - • STUNNING Live Edge Guitar BUILD - Gia...
➡️Purchase templates here: https://www.thewoodenhobbyist.com/sto...
➡️Check out N3 Nano for yourself: https://n3nano.com
➡️Guyker Guitar Parts: www.guyker.com
Rotating Gutar Stand - • Making A Spinning Guitar Stand - Guit...
Cheap but QUALITY rasps for guitars - https://amzn.to/3Y7Ehb9
Table edge router bit for neck shaping - https://amzn.to/40kRiSL
00:00 Intro
00:18 Starting on the guitar necks
01:31 Traveling to Blacktail Studio
02:54 Breaking down the Bastogne Walnut
04:27 Prepping and pouring epoxy
05:30 Milling and prepping the guitar bodies
07:46 Rough shaping the guitar bodies
08:23 Chambering the guitar bodies
09:06 Roughly shaping the guitar tops
09:44 Cutting the P-Hole
10:31 Preparing and gluing the guitar tops
12:18 Back to the guitar necks
12:58 Cutting the ebony fret boards
13:25 Working on the 12th fret inlay with denim
14:32 Truss rod, fretboard glue up, and flush trimming the neck
15:24 Making fretboard binding
17:17 Progress shots and giveaway information
17:50 Routing an angled neck pocket
18:20 Shaping the guitar with a rasp
19:16 Brass and denim fretboard inlays
20:25 Shaping a guitar neck
21:45 Channeling the nut slots
22:09 Fretboard radii
22:24 Installing, shaping and polishing frets
24:05 Making guitar knobs from scratch
26:29 Finishing the guitars with Rubio Monocoat
27:11 Guyker guitar hardware
28:00 Reveal and sound test
