Tunnel Project Civil 3D - Lecture 1 : How to Create Circular Tunnel Assembly Using Civil 3D

Опубликовано: 04 Апрель 2020
на канале: Abdelrahman Hamdi Infrastructure

14,109

163

#civil3d #tunnel
This Video Illustrates How to create Tunnel Assembly Using Civil 3D 2019 from Circular Polylines .
This Assembly will be used to create tunnel corridor .Based on that corridor , we can create cross section views using sample Lines. Moreover , we can utilize this assembly to calculate tunnel quantities.

This assembly is very crucial , because it is constructed by tbm machine.

We can create this assembly manually in the following steps :
1- Draw Polylines for Tunnel components
2- Transform Polylines into subassemblies
3- Add shape and code for each subassembly , to calculate quantities.
4- Add Subassemblies to main assembly

Prepared by \

Eng Abdelrahman Mohamed Hamdi Awad

NAT Civil Engineer
Master certified at Civil Engineering
Certified professional from Autodesk
Email : [email protected]
Mobile :01092624477